K-12 MG1655大腸桿菌克隆菌株
貨號 名稱 規格 儲存
明舟生物的各批次質粒
菌株發貨前均經過嚴格的多重驗證,如存在質量問題,請在收到產品三個月內通知我司。收到甘油菌后,請及時在固體平板上劃線培養,挑取單菌落接種到液體培養基中,震蕩培養后使用并保存甘油菌。如需獲取
菌株其他詳細信息請登錄我司官網聯系查詢。
基因型:
F- lambda- ilvG- rfb-50 rph-1(NC_000913)
基本信息:
抗性:無
培養基:LB
培養條件:37℃,有氧,LB
質粒轉化:42℃熱激
保存方式:20%甘油,-20℃
基本應用:用于基因克隆
菌株簡介:
K-12 MG1655是一株K系列的大腸桿菌,經檢測無Amp和Kan抗性,可用LB培養基,37℃培養,其代謝類型是異養兼性厭氧型,可用于代謝研究、基因編輯等實驗。
The original K-12 wild-type strain from the Stanford collection contained both the F plasmid and phage lambda. MG1655 was constructed by curing that strain using acridine orange and UV.This strain was sequenced by the Blattner laboratory because it approximates wild-type E. coli and "has been maintained as a laboratory strain with minimal genetic manipulation, having only been cured of the temperate bacteriophage lambda and F plasmid by means of ultraviolet light and acridine orange, respectively." (Blattner, et al. 1997). The mutations listed in the genotype are present in most K-12 strains and were probably acquired early in the history of the laboratory strain. A frameshift at the end of rph results in decreased pyrE expression and a mild pyrimidine starvation, such that the strain grows 10 to 15% more slowly in pyrimidine-free medium than in medium containing uracil (Jensen 1993). The ilvG- mutation is a frameshift that knocks out acetohydroxy acid synthase II (Lawther, et al. 1982). The rfb-50 mutation is an IS5 insertion that results in the absence of O-antigen synthesis (Liu and Reeves 1994).
MG1655 was derived and named by Mark Guyer from strain W1485, which was derived in Joshua Lederberg's lab from a stab-culture descendant of the original K-12 isolate. This original E. coli strain K-12 was obtained from a stool sample of a diphtheria patient in Palo Alto, CA in 1922 (Bachmann, B., pp. 2460-2488 in Neidhardt et al.1996, Escherichia coli and Salmonella: Cellular and Molecular Biology, ASM Press).MG1655 grows on LB and M9 minimal medium (+ Glucose + 1ug/ml thiamine).
注意事項:
1、為了您的安全和健康,請穿實驗服并戴一次性手套操作。本產品僅可用于實驗室研究,不能用于動物,人體以及作為食品添加劑等用途。
2、使用甘油菌時可不完全融解,在甘油菌表面蘸取少量涂布固體瓊脂平板即可,也可完全融解后使用,但隨著凍融次數的增加,菌株的活力會逐漸下降。